SGI/IRIX - Revision history

NickPGSmith: /* Hardware */

2024-06-26T17:39:29Z

Hardware

← Older revision		Revision as of 17:39, 26 June 2024
Line 7:		Line 7:
	* Disk (SCSI ID 1)		* Disk (SCSI ID 1)
	** Original: Seagate ST173404LCV (73 GB, 10 k RPM, U160)		** Original: Seagate ST173404LCV (73 GB, 10 k RPM, U160)
	** Upgraded: ?		** Upgraded: Fujitsu MBA3147NC (146 GB, 15 k RPM, U320)
	* Monitor: [https://dl.dell.com/manuals/all-products/esuprt_electronics/esuprt_display/dell-2007fp_user's%20guide_en-us.pdf Dell 2007FP] using 13W3-VGA converter		* Monitor: [https://dl.dell.com/manuals/all-products/esuprt_electronics/esuprt_display/dell-2007fp_user's%20guide_en-us.pdf Dell 2007FP] using 13W3-VGA converter
	** Vertical: 56 Hz - 76 Hz (except 1600 x 1200: 60 Hz only)		** Vertical: 56 Hz - 76 Hz (except 1600 x 1200: 60 Hz only)

NickPGSmith: /* Hardware */

2024-06-26T17:26:09Z

Hardware

← Older revision		Revision as of 17:26, 26 June 2024
Line 6:		Line 6:
	* Odyssey Graphics (V8)		* Odyssey Graphics (V8)
	* Disk (SCSI ID 1)		* Disk (SCSI ID 1)
	** Original: Seagate ST173404LCV (73 GB, ~~10000~~ RPM, U160)		** Original: Seagate ST173404LCV (73 GB, 10 k RPM, U160)
	** Upgraded: ?		** Upgraded: ?
	* Monitor: [https://dl.dell.com/manuals/all-products/esuprt_electronics/esuprt_display/dell-2007fp_user's%20guide_en-us.pdf Dell 2007FP] using 13W3-VGA converter		* Monitor: [https://dl.dell.com/manuals/all-products/esuprt_electronics/esuprt_display/dell-2007fp_user's%20guide_en-us.pdf Dell 2007FP] using 13W3-VGA converter

NickPGSmith: /* Hardware */

2024-06-26T17:08:57Z

Hardware

← Older revision		Revision as of 17:08, 26 June 2024
Line 5:		Line 5:
	* 1 GB RAM (fully populated)		* 1 GB RAM (fully populated)
	* Odyssey Graphics (V8)		* Odyssey Graphics (V8)
	* ~~173 GB Fujitsu~~ Disk (SCSI ID 1)		* Disk (SCSI ID 1)
			** Original: Seagate ST173404LCV (73 GB, 10000 RPM, U160)
			** Upgraded: ?
	* Monitor: [https://dl.dell.com/manuals/all-products/esuprt_electronics/esuprt_display/dell-2007fp_user's%20guide_en-us.pdf Dell 2007FP] using 13W3-VGA converter		* Monitor: [https://dl.dell.com/manuals/all-products/esuprt_electronics/esuprt_display/dell-2007fp_user's%20guide_en-us.pdf Dell 2007FP] using 13W3-VGA converter
	** Vertical: 56 Hz - 76 Hz (except 1600 x 1200: 60 Hz only)		** Vertical: 56 Hz - 76 Hz (except 1600 x 1200: 60 Hz only)

NickPGSmith: 5 revisions imported

2024-05-08T04:53:43Z

5 revisions imported

← Older revision	Revision as of 04:53, 8 May 2024
(No difference)

NickPGSmith: /* CD Images */

2023-11-28T20:45:15Z

CD Images

← Older revision		Revision as of 20:45, 28 November 2023
Line 71:		Line 71:

	See [https://wiki.preterhuman.net/index.php?title=SGI_Media_Product_Numbers&mobileaction=toggle_view_desktop here] for list of SGI CD numbers. EFS CD images can be converted with [http://wiki.irixnet.org/EFS efs2tar] or download the tar archives.		See [https://wiki.preterhuman.net/index.php?title=SGI_Media_Product_Numbers&mobileaction=toggle_view_desktop here] for list of SGI CD numbers. EFS CD images can be converted with [http://wiki.irixnet.org/EFS efs2tar] or download the tar archives.

			* [http://www.bitsavers.org/bits/SGI/mips/cd/irix_set1/ Bitasvers 1]
			* [http://www.bitsavers.org/bits/SGI/mips/cd/irix_set2/ Bitasvers 2]

	Create structure installation, eg:		Create structure installation, eg:

NickPGSmith: /* CD Images */

2023-11-22T07:31:38Z

CD Images

← Older revision		Revision as of 07:31, 22 November 2023
Line 91:		Line 91:
	* 812-0877-030 [https://jrra.zone/sgi/tar/IRIX%206.5%20Applications%20August%202006.tar IRIX 6.5 Applications August 2006] : apps		* 812-0877-030 [https://jrra.zone/sgi/tar/IRIX%206.5%20Applications%20August%202006.tar IRIX 6.5 Applications August 2006] : apps
	* 812-1180-030 [https://jrra.zone/sgi/tar/IRIX%206.5%20Complementary%20Applications%20August%202006.tar IRIX 6.5 Complementary Applications August 2006] : capps		* 812-1180-030 [https://jrra.zone/sgi/tar/IRIX%206.5%20Complementary%20Applications%20August%202006.tar IRIX 6.5 Complementary Applications August 2006] : capps

			[https://terminals-wiki.org/wiki/index.php/User:Legalize/CD_Part_Numbers See here for Aug 2006 Freeware]

	Freeware (Feb 2003):		Freeware (Feb 2003):

NickPGSmith: /* Docker Setup */

2023-03-14T17:47:40Z

Docker Setup

← Older revision		Revision as of 17:47, 14 March 2023
Line 131:		Line 131:
	** Used by Inst to transfer the majority of data		** Used by Inst to transfer the majority of data

	Download [https://hub.docker.com/r/~~dexter1~~/irix-install/ this] docker image and check:		Download [https://hub.docker.com/r/nickpgsmith/irix-install/ this] docker image and check:
	docker pull nickpgsmith/irix-install		docker pull nickpgsmith/irix-install
	docker images		docker images

NickPGSmith: 1 revision imported

2023-02-17T21:02:13Z

1 revision imported

← Older revision	Revision as of 21:02, 17 February 2023
(No difference)

NickPGSmith: /* CD Images */

2023-01-08T21:40:35Z

CD Images

New page

== Hardware ==

Octane:
* IP30, Single 400 MHz R12000 CPU
* 1 GB RAM (fully populated)
* Odyssey Graphics (V8)
* 173 GB Fujitsu Disk (SCSI ID 1)
* Monitor: [https://dl.dell.com/manuals/all-products/esuprt_electronics/esuprt_display/dell-2007fp_user's%20guide_en-us.pdf Dell 2007FP] using 13W3-VGA converter
** Vertical: 56 Hz - 76 Hz (except 1600 x 1200: 60 Hz only)
** Horizontal: 30 kHz - 81 kHz
** SGI can drive 1024 x 768 / 75 Hz

Can use last IRIX version (6.5.30, released 2006-08).

See [http://web.ncf.ca/aa571/datfaq.htm here] for information on DAT drives that can play audio.

=== Disk Partitions ===

* 0: root filesystem
* 1: swap
* ...
* 6: usr filesystem
* 7: entire usable portion, excluding volume header
* 8: volume header
* 9: non-SCSI bad block list
* 10: entire disk, including volume header
* ...
* 15: XFS log

From PROM:
* SystemPartition=xio(0)pci(15)scsi(0)disck(1)rdisk(0)partition(8)

== Command Monitor ARCS (PROM) ==

Some commands (See full list [https://techpubs.jurassic.nl/manuals/0650/admin/IA_ConfigOps/sgi_html/ch09.html here]):
* help
* init
* hinv
* printenv
* setenv
* unsetenv
* passwd
* boot -f bootp()...
** or just bootp()...

Note:
* Set keyboard variable: keybd, eg "US" or "GB".
* Previous line: CTRL-P
* Disk specification: dksc(0,1,0)/file (for SCSI controller 0, unit 1, partition 0)

The "ping" command does not use ICMP echo, rather obsolete echo (7/udp), eg:
09:37:49.278482 IP 0.0.0.0.3152 > 10.0.0.1.echo: UDP, length 64
09:37:49.278674 IP 10.0.0.1.echo > 10.0.0.2.3152: UDP, length 64

The IP "0.0.0.0" is used if the netaddr PROM variable is not set.

== Network installation ==

In this procedure, we will use a BOOTP server to tell the SGI's PROM where to find in the Installation tools via TFTP. The installation tool itself obtains the full installation via RSH. These services are provided by a docker instance; this was running on Fedora 35.

* Ensure no other BOOTP or DHCP servers are running on the network
* Services are highly insecure, so recommend running for short time on isolated network
* For this example:
** sgi : 10.0.0.2
** lin-docker : 10.0.0.1

To monitor traffic, this tcpdump command is useful:
tcpdump -i any -v -nn "portrange 67-69 or port 514 or port 7"

=== CD Images ===

See [https://wiki.preterhuman.net/index.php?title=SGI_Media_Product_Numbers&mobileaction=toggle_view_desktop here] for list of SGI CD numbers. EFS CD images can be converted with [http://wiki.irixnet.org/EFS efs2tar] or download the tar archives.

Create structure installation, eg:
mkdir /home/user/irix
cd /home/user/irix

Download and extract tar archives to suitable subdirectories:

* 812-0818-030 [https://jrra.zone/sgi/cds/IRIX%206.5.30%20Installation%20Tools%20and%20Overlays%20%281%20of%203%29.iso IRIX 6.5.30 Installation Tools and Overlays (1 of 3)] : inst
* 812-0819-030 [https://jrra.zone/sgi/tar/IRIX%206.5.30%20Overlays%20%282%20of%203%29.tar IRIX 6.5.30 Overlays (2 of 3)] : overlays2
* 812-0817-030 [https://jrra.zone/sgi/tar/IRIX%206.5.30%20Overlays%20%283%20of%203%29.tar IRIX 6.5.30 Overlays] : overlays3
* 812-0759-002 [https://jrra.zone/sgi/tar/IRIX%206.5%20Foundation%201.tar IRIX 6.5 Foundation 1] : found1
* 812-0760-002 [https://jrra.zone/sgi/tar/IRIX%206.5%20Foundation%202.tar IRIX 6.5 Foundation 2] : found2
Common prerequisites for other packages:
* 812-0766-003 [https://jrra.zone/sgi/tar/IRIX%206.5%20Development%20Libraries%20February%202002.tar IRIX 6.5 Development Libraries] : dev_libs
* 812-0757-004 [https://jrra.zone/sgi/tar/IRIX%20Development%20Foundation%201.3.tar IRIX Development Foundation 1.3] : dev_found

Optional, but recommended:
* 812-0774-002 [https://jrra.zone/sgi/tar/ONC3%20NFS%20Version%203.tar ONC3/NFS Version 3 for IRIX 6.2, 6.2, 6.4 and 6.5] : nfs
* 812-0877-030 [https://jrra.zone/sgi/tar/IRIX%206.5%20Applications%20August%202006.tar IRIX 6.5 Applications August 2006] : apps
* 812-1180-030 [https://jrra.zone/sgi/tar/IRIX%206.5%20Complementary%20Applications%20August%202006.tar IRIX 6.5 Complementary Applications August 2006] : capps

Freeware (Feb 2003):
* 812-0773-019 [https://jrra.zone/sgi/tar/Freeware%20%28part%201%20of%204%29.tar Freeware 1] : fware1
** autoconf
** apache2
** bash
** curl
* 812-0964-019 [https://jrra.zone/sgi/tar/Freeware%20%28part%202%20of%204%29.tar Freeware 2] : fware2
** gcc
* 812-1085-019 [https://jrra.zone/sgi/tar/Freeware%20%28part%203%20of%204%29.tar Freeware 3] : fware3
** make
** md5
** openssh
** postgresql
* 812-1137-019 [https://jrra.zone/sgi/tar/Freeware%20%28part%204%20of%204%29.tar Freeware 4] : fware4
** samba
** teTeX
** zfig
** zip

=== SGI ===

Esc to enter SGI Command Monitor ([https://nixdoc.net/man-pages/IRIX/man1/prom.1.html PROM]) and note the MAC address:
printenv eaddr

The BOOTP server does not to respond unless an IP is set to match what it has for the client:
setenv netaddr 10.0.0.2

=== Docker Setup ===

This docker image provides the services:
* echo (7/udp)
** For response to PROM's "ping"; not used during installation
* bootps (67/udp)
** Privides BOOTP response, gives out an IP and points to TFTP sever
* tftp (69/udp)
** Allows the transfer of initial installer tools
* shell (514/tcp)
** Used by Inst to transfer the majority of data

Download [https://hub.docker.com/r/dexter1/irix-install/ this] docker image and check:
docker pull nickpgsmith/irix-install
docker images

Create a [https://www.net.princeton.edu/software/dhcpd/bootptab.5.html bootptab] file in /home/user/irix:
sgi:ha=0800690b9e1f:sa=10.0.0.1:ds=10.0.0.1:rp=/data

where ha is the Ethernet address of the SGI, sa is the IP of the TFTP server, ds is the IP of the DNS server.

Start Docker image (as root):
docker run --name irix --network host --add-host sgi:10.0.0.2 --volume /home/user/irix:/data:ro,Z -it nickpgsmith/irix-install

Ensure firewall is not blocking:
firewall-cmd --add-port="7/udp"
firewall-cmd --add-port="67/udp"
firewall-cmd --add-port="69/udp"
firewall-cmd --add-port="514/tcp"

or:
systemctl stop firewalld

Can boot standalone shell with any of:
boot -f bootp()lin-docker:/inst/dist/sa(sash64)
boot -f bootp()lin-docker:inst/dist/sa(sash64)
bootp():/inst/dist/sa(sash64)
bootp():inst/dist/sa(sash64)

NOTE: It seems like replacing the hostname ("lin-docker") with the IP does not work.

=== Disk Labelling ===

The disk needs to have an SGI label and partition structure. Invoke disk partitioner with either:
boot -f bootp():inst/stand/fx.64 --x
bootp():inst/stand/fx.64 -x

Accept defaults for disk: dksc(0,1,0)
fx: "device-name" = (dksc)
fx: ctlr# = (0)
fx: drive# = (1)
...opening dksc(0,1,0)

To show current partitions:
* /label/show/partitions

Partition root drive (for OS installation) with defaults:
* /label/create/all

By default, 128 MB of swap is allocated as partition 1. To change, use:
* /repartition/resize

A non-root disk can be partitioned:
* /repartition/optiondrive

Erase disk and check surface for bad blocks (slow):
* /exercise/sequential
* modifier = “wr-c”, enter start and number of blocks

Exit:
* /exit

See also [https://nixdoc.net/man-pages/IRIX/man1/fx.1.html here]

=== Installation ===

(Graphical):
* Select "Install System Software"
* Select "Remote Directory"
** For "remote host" enter the hostname of the install server (lin-docker)
** For "remote directory" enter the sub-directory from the /home/user/irix base where the stand-alone shell (sa) is located (inst/dist)

This is equivalent to the command:
xio(0)pci(15)multi(0)network(0)bootp()lin-docker:inst/dist/sa(sash64)

(From PROM Command Prompt):
bootp():inst/dist/miniroot/unix.IP30

Installer will present:
* If there is a newly partitioned disk, a report of no realroot will be seen:
** Confirm create new file system on /dev/dsk/realroot
* Choose 4096 bytes blocksize for disks ~> 4 GB
* Enter hostname, IP, Netmask
* Inst 4.1 Main Menu (Inst> prompt)
** For nonclean disks: 13/11/y/yes
** Change hostname and IP: 13/12 and 13/13

NOTE: >Inst uses rsh (not TFTP) so subsequent paths are relative to / not /data
* Open Source: 2
* Choose location (/data is the mount point within docker)
** lin-docker:/data/inst/dist
*** Confirm network address
*** Choose feature stream (2)
* Continue to add additional disks from RSH root:
** lin-docker:/data/overlays2/dist
** lin-docker:/data/overlays3/dist
** lin-docker:/data/found1/dist
** lin-docker:/data/found2/dist
** lin-docker:/data/nfs/dist
** lin-docker:/data/apps/dist
** lin-docker:/data/capps/dist
** lin-docker:/data/apps/dev_libs
** lin-docker:/data/capps/dev_found
* Return to >Inst (11)

keep *
install standard
install eoe.sw.ipv6
install eoe.man.ipv6
install eoe.man.ipv6_rn

Check for conflicts; will report: java2_plugin.sw.mozilla_freeware and inventor_dev.sq.base
(because Development Foundation is not installed here) and remove:
conflicts
conflicts 1a 2a

Start installation:
go

After transfer over the network, Requickstart ELF files:
quit

and confirm restart into the new OS installation

=== EZsetup Post-installation ===

Login with EZsetup account
Step 1:
* Improve Security: disable or set passwords for accounts: root, lp, nuucp, EZsetup, demos, OutOfBox, guest
* Enable/disable Java/JavaScript
* Turn off NIS
* Use shadow password file
* Require passwords
* Disable Visual Login
* Disable privilege users (leaving only root)
* Protect new users' files
* Disable remote X
* Disable IP forwarding
* Disable OOTB WebServer

Step 2:
* Setup networking (DHCP/static)

Step 3:
* Add new user(s) (home directory in /usr/people)

Step 4:
* Web Config
* Desktop setup

=== License Server ===

Install Flexlm from Overlays 3 disk:
* license_eoe.sw.flexlm_server
* license_eoe.sw.flexlm_utils
* license_eoe.sw.license_eoe
* license_eoe.man.flexlm_server

Edit /var/flexlm/license.dat (see [https://www-local.pdc.kth.se/doc/pgi/3.3/flexuser/chap2.htm here] for format)

SERVER robin ANY
FEATURE cc sgifd 7.000 1-jan-0 0 ACE61A24A73E99462ECC HOSTID=ANY vendor_info="C <=128 CPU" ISSUER="Hax Force, Inc."
FEATURE cpp sgifd 7.000 1-jan-0 0 8CE65AB48DDCD394E6E1 HOSTID=ANY vendor_info="C++ <=128 CPU" ISSUER="Hax Force, Inc."
FEATURE f77 sgifd 7.000 1-jan-0 0 ACC63A346C444B7C99A7 HOSTID=ANY vendor_info="F77 <=128 CPU" ISSUER="Hax Force, Inc." ck=0
FEATURE f90 sgifd 7.000 1-jan-0 0 4C66BA143C7230ED9230 HOSTID=ANY vendor_info="F90 <=128 CPU" ISSUER="Hax Force, Inc." ck=42
FEATURE auto_pp sgifd 7.000 1-jan-0 0 8C862A14661D81BA12EB HOSTID=ANY vendor_info="APO <=128 CPU" ISSUER="Hax Force, Inc."
FEATURE WorkShop sgifd 2.000 1-jan-0 0 6C16DAD49AC3AF2388D3 HOSTID=ANY vendor_info="PRODEV WORKSHOP" ISSUER="Hax Force, Inc." ck=73

chkconfig flexlm start

=== Further Post-installation ===

Static IP address:
* hostname in: /etc/sys_id
* add IP/hostname in: /etc/hosts
* /etc/resolv.conf
* /etc/nsswitch.conf
chkconfig autoconfig_ipaddress off
chkconfig routed off
chkconfig esp off; rm -rf /0esp

Default route (or static routes in general) in: /etc/config/static-route.options
$ROUTE $QUIET add net default 192.168.1.1

Turn on IPv6:
systune ip6_enable 1
(need to install eoe.sw.ipv6 / eoe.man.ipv6 / eoe.man.ipv6_rn)

Improve TCP sequence number obscurity:
systune tcpiss_md5 1

IP Aliases (multiple IPs): /etc/config/ipaliases.options
ef0 192.168.1.10 netmask 0xffffff00 broadcast 192.168.1.255
chkconfig ipaliases on

Time:
* Add server to /etc/ntp.conf
chkconfig ntp on
echo "TZ=Europe/London" >> /etc/TIMEZONE
* Turn off legacy services:
chkconfig timed off
chkconfig timeslave off

* Move /usr/people to /home
** Change UID/GID to match Linux (1000/1000)

XServer configuration:
* /var/X11/xdm/Xservers

Syslog Messages:
* /var/adm/SYSLOG

CDE:
chkconfig xdm off
chkconfig dtlogin on

More Software

Check software installed:
versions

Graphical tool:
swmgr

Command line tool:
inst -f somepath/dist

>Inst install standard
>Inst remove
> ...
>Inst conflicts 1a 1b

Install the default subsystems:
>inst go

Install everything:
>inst all

Install bash (/usr/gnu/bin/bash) from Foundation 2 disk:
* gnu.sw.bash
* gnu.man.bash
* gnu.base.gnu_base
* gnu.sw.lib_readline

install SSH Server from Foundation 3 disk:

install sysadm_xvm
install sysadm_base
install sysadm_cluster.sw.client
install eoe.sw.xvm
install sysadm_xvm.sw.client
install eoe.sw.xfsrt
install eoe.books
install eoe.sw.xlv
install eoe.sw.xlvplex
install license_eoe
install license_dev
install eoe.sw.uucpeoe.sw.ipv6
install eoe.sw.quotas
install eoe.sw.ipv6
install eoe.sw.imagetools
install eoe.sw.netman
install eoe.sw.pam
install eoe.sw.pam_dev
install eoe.sw.terminfo

== Development and Compilers ==

The prerequisites should have been installed:
* Foundation 1
* Foundation 2
* Overlays 1
* Overlays 2
* Overlays 3
* Development Libraries
* Development Foundation
* License entries required in license.dat, but flexlm does not need to run.

Plus one or all of the compilers:
* 812-0707-010 [https://jrra.zone/sgi/tar/MIPSpro%20C%20Compiler%207.4.tar MIPSpro C Compiler 7.4] : mipspro_c
** c_fe.man.relnotes (C Front-end Release Notes)
** c_fe.sw.c (C Front-end Compiler)
* 812-0400-010 [https://jrra.zone/sgi/tar/MIPSpro%20C%2b%2b%20Compiler%207.4.tar MIPSpro C++ Compiler 7.4] : mipspro_cpp
** c++_fe.man.relnotes (C++ Front-end Release Notes)
** c++_fe.sw.c++ (C++ Front-end Compiler)
* 812-0403-010 [https://jrra.zone/sgi/tar/MIPSpro%20Fortran%2077%20Compiler%207.4.tar MIPSpro Fortran 77 Compiler 7.4] : mipspro_f77
** ftn77_fe.man.ftn (Fortran 77 Front-end Compiler Man Pages)
** ftn77_fe.man.relnotes (Fortran 77 Front-end Release Notes)
** ftn77_fe.sw.ftn77 (Fortran 77 Front-end Compiler)
* 812-0402-010 MIPSpro Fortran 90 Compiler 7.4
* 812-0706-002 : [https://sgi-irix.s3.amazonaws.com/development/mipspro-74/mipsproap.tar.gz MIPSpro Auto Parallelizing Option 7.4] : mipspro_autop
** Release notes only; to use build-in option -apo requires a license
Latest patch overlay:
* 812-0980-007 [http://mirror.rqsall.com/misc/sgi/MIPSPro7.4.4.tar.gz MIPSpro 7.4.4m Maintenance Release] : mipspro_7.4.4)

* 812-0925-001 [https://jrra.zone/sgi/tar/MIPSpro%20All-Compiler%20CD%20May%201999.tar MIPSpro All-Compiler (C/C++/F77/F90 7.3)] : mipspro_all

Optionally:
* 812-0768-006 [https://jrra.zone/sgi/tar/ProDev%20WorkShop%202.9.2.tar ProDev WorkShop 2.9.2] prodev (Can't find source for 812-0768-009 V2.9.5)
* 812-0653-002 [https://archive.org/download/sgi_SCSL_Scientific_Library_1.2_for_IRIX_6.4_and_6.5/SCSL%20Scientific%20Library%201.2%20for%20IRIX%206.4%20and%206.5.img SCSL Scientific Library 1.2] : scsl (Can't find source for 812-0653-004 V1.4
** Included in overlay CDs?

* 812-0924-002 [https://jrra.zone/sgi/tar/Compiler%20Execution%20Environment%207.4.tar Compiler Execution Environment 7.4] : comp_exe

== NFS ==

NFS Server: define exports in /etc/exports, eg:
/home -access=bonnie:clyde
/data -ro,access=foo,rw=bar,root=baz
/spare @192.168.1.0/24

NFS Client:
By default, /etc/auto_master has a /hosts map

== SGI/IRIX Documentation ==

See [http://irix7.com/techpubs.html here] for a large library, specifically:

* 007-0850-170 [http://irix7.com/techpubs/007-0850-170.pdf ONC3/NFS Administrator’s Guide]
* 007-1342-180 [http://irix7.com/techpubs/007-1342-180.pdf Desktop User’s Guide]
* 007-1366-190 [http://irix7.com/techpubs/007-1366-190.pdf Personal System Administration Guide]
* 007-2825-013 [http://irix7.com/techpubs/007-2825-013.pdf IRIX Admin: Disks and Filesystems]
* 007-2859-021 [http://irix7.com/techpubs/007-2859-021.pdf IRIX Admin: System Configuration and Operation]
* 007-2860-012 [http://irix7.com/techpubs/007-2860-012.pdf IRIX Admin: Networking and Mail]
* 007-2861-005 [http://irix7.com/techpubs/007-2861-005.pdf IRIX Admin: Peripheral Devices]
* 007-2862-008 [http://irix7.com/techpubs/007-2862-008.pdf IRIX Admin: Backup, Security, and Accounting]
* 007-3435-004 [http://irix7.com/techpubs/007-3435-004.pdf OCTANE Workstation Owner’s Guide]

* 007-0704-140 [http://irix7.com/techpubs/007-0704-140.pdf C++ Programmer's Guide]
* 007-0704-150 [http://irix7.com/techpubs/007-0704-150.pdf MIPSpro C++ Programmer's Guide]
* 007-3687-010 [https://irix7.com/techpubs/007-3687-010.pdf Message Passing Toolkit: MPI Programmer’s Manual]

== Sys Admin Notes ==

Set keyboard layout:
ipanel

3 Button mouse
systune pc_mouse 2

* 0 : Default 3-button mode
* 1 : 3-button Wheel Mouse (type 3), Wheel scrolling generates button events 4 & 5
* 2 : 5-button Wheel Mouse (type 4), Wheel & buttons 4 & 5 generate button events 4 & 5

Hardware info:
hinv -t memory
sysconf

Packages:
showprods -M -1
versions -b patch\*

Network:
netstat -ian
netstat -an -f inet4
netstat -anW -f inet6

Add swap:
mkfile -v 4096m /usr/swap
swap -a /usr/swap

Install local file:
inst -r /usr -f neko_zlib_1211.tardist