Smithnet Wiki - Recent changes [en-gb]

HP-UX

NickPGSmith — Fri, 17 Jul 2026 17:30:03 GMT

@@ Line 9: / Line 9: @@
 Other software archive:
 * [https://archive.org/details/ftp-hpux-connect-org-uk HP Connect]
 == Boot ==

Hardware

NickPGSmith — Fri, 17 Jul 2026 07:23:37 GMT

HP Vizualize C3000 (9000/785/C3000)

← Older revision		Revision as of 07:23, 17 July 2026
(11 intermediate revisions by the same user not shown)
Line 1:		Line 1:
	== Laptops ==		== Laptops ==

	* Dell E6400		=== Dell E6400 ===
	** CPU: Core2Duo (2 logical processors)
	** RAM: 8 GiB (2 x 4 GiB PC2-6400)		* CPU: Core2Duo (2 logical processors)
	** Max RAM: 8 GiB		* RAM: 8 GiB (2 x 4 GiB PC2-6400)
	* Dell E7450		* Max RAM: 8 GiB
	** CPU: Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz (4 logical processors)		Dell E7450
	** RAM: 16 GiB (2 x 8 GB DDR3 PC3L-12800/DDR3L-1600)		* CPU: Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz (4 logical processors)
	** Max RAM: 16 GiB (offical, 32 GiB unofficial with DDR3Low Voltage)		* RAM: 16 GiB (2 x 8 GB DDR3 PC3L-12800/DDR3L-1600)
			* Max RAM: 16 GiB (offical, 32 GiB unofficial with DDR3Low Voltage)

	== Printers ==		== Printers ==

	* Dell 1350cnw		=== Dell 1350cnw ===
	** Colour
	** Printing Preferences -> Layout -> Margin Shift/Margin -> Print Position -> Position: Center		* Colour
	* HP LaserJet P2055dn		* Printing Preferences -> Layout -> Margin Shift/Margin -> Print Position -> Position: Center
	** Properties -> Device Settings -> Installable Options -> Duplex Unit: Installed
			=== HP LaserJet P2055dn ===

			* Properties -> Device Settings -> Installable Options -> Duplex Unit: Installed

	== Servers/Desktops ==		== Servers/Desktops ==

	* Dell OptiPlex 7040		=== Dell OptiPlex 7040 ===

	** CPU: Intel Core i7-6700 CPU @ 3.40 GHz (8 logical processors)		** CPU: Intel Core i7-6700 CPU @ 3.40 GHz (8 logical processors)
	** RAM: 32 GiB (4 x 8 GiB)		** RAM: 32 GiB (4 x 8 GiB)
	** Max RAM: 64 GiB (4 x 16 GiB)		** Max RAM: 64 GiB (4 x 16 GiB)
	* Dell OptiPlex 9010		** 120 MHz ECC SDRAM, propriety
	** CPU: Intel Core i7-3770 CPU @ 3.40 GHz (8 logical processors)
	** RAM: 32 GiB (4 x 8 GiB)		=== Dell OptiPlex 9010 ===
	** Max RAM: 32 GiB (PC4-2400) (4 x 8 GiB)
	* Dell PowerEdge T320		* CPU: Intel Core i7-3770 CPU @ 3.40 GHz (8 logical processors)
	** CPU: Intel Pentium 1400 / Intel Xeon E5-1410 / Intel Xeon E5-2400 / Intel Xeon E5-2400 v2 (4 - 8 cores)		* RAM: 32 GiB (4 x 8 GiB)
	** RAM:		* Max RAM: 32 GiB (PC4-2400) (4 x 8 GiB)
	** Max RAM: 196 GiB (PC3-10600/DDR3-1333 Registered DIMM, ECC) (6 x 32 GiB)
	* HP DL380G5		=== Dell PowerEdge T320 ===
	** CPU: Intel Xeon E5450 @ 3 GHz
	** RAM: 16 GB (8 x 2 GiB)		* CPU: Intel Pentium 1400 / Intel Xeon E5-1410 / Intel Xeon E5-2400 / Intel Xeon E5-2400 v2 (4 - 8 cores)
	** Max RAM: 64 GB (8 x 8 GiB)		* RAM:
			* Max RAM: 196 GiB (PC3-10600/DDR3-1333 Registered DIMM, ECC) (6 x 32 GiB)

			=== HP DL380G5 ===

			* CPU: Intel Xeon E5450 @ 3 GHz
			* RAM: 16 GB (8 x 2 GiB)
			* Max RAM: 64 GB (8 x 8 GiB)
	* HP iLO 2.33		* HP iLO 2.33
	** ssh -oKexAlgorithms=+diffie-hellman-group1-sha1 -oHostKeyAlgorithms=+ssh-rsa host-ilo		** ssh -oKexAlgorithms=+diffie-hellman-group1-sha1 -oHostKeyAlgorithms=+ssh-rsa host-ilo
Line 50:		Line 61:
	set license=35DPHSVSXJHGBJNC7N5R2SS4W		set license=35DPHSVSXJHGBJNC7N5R2SS4W

	* HP Vizualize [https://www.openpa.net/systems/hp-visualize_b1000_c3000_c3600.html C3000] (9000/785/C3000)		=== HP Vizualize [https://www.openpa.net/systems/hp-visualize_b1000_c3000_c3600.html C3000] (9000/785/C3000) ===
	** 400 MHz PA-RISC PA-8500
	** 512 MB (4 of 8 slots, max 8 GB)		* 400 MHz PA-RISC PA-8500
	** HP Visualize FX6 (A4554B) Graphics Card ([https://en.wikipedia.org/wiki/VESA_Enhanced_Video_Connector EVC] aka P&D-A Output) (with A4560A texture accelerator)		* 512 MB (4 of 8 slots, max 8 GB)
	*** Initially driving: 1280x1024@75Hz, compatible with 1600x1200 @75 Hz		** Proprietary ECC RAM: A4995A for 512 MB, A6016A for 1 GB
	** Firmware 5.0, ISL A.00.43		* HP Visualize FX6 (A4554B) Graphics Card ([https://en.wikipedia.org/wiki/VESA_Enhanced_Video_Connector EVC] aka P&D-A Output) (with A4560A texture accelerator)
	** Liteon CDROM LTN485S -> LG GDR8163B CD/DVD Drive		** Initially driving: 1280x1024@75Hz, compatible with 1600x1200 @75 Hz
	** Space for 2 SCSI-3 (Ultra 160) Disks		* Firmware 5.0, ISL A.00.43
	** Disk:		* Liteon CDROM LTN485S -> LG GDR8163B CD/DVD Drive
	*** Original: Seagate ST3920LC (9.1 GB, 10 k RPM, U160) / Fujitsu MAN3184MC (18 GB, 10 k RPM, U160)		* External SCSI:
	*** Upgraded: ~~seagate~~ ST373454LC (73 GB, 15 k RPM, U320)		** 68 pin Ultra2 Wide/LVD
	** Supports HP-UX		** 50 pin "Narrow" SCSI-2
	*** 10.20 32-bit from version ACE9912		* Internal SCSI:
	*** 11.00 64-bit from version ACE9911		** Space for two SCA, Ultra2 (SCSI-3) / Ultra 160 Disks
	*** 11i v1 (11.11)		** Original: Seagate ST3920LC (9.1 GB, 10 k RPM, U160) / Fujitsu MAN3184MC (18 GB, 10 k RPM, U160)
	**** Last Patches: "December 2009 Gold QPK bundle" (GOLDQPK11i-11.11.0912)		** Upgraded: Seagate ST373454LC (73 GB, 15 k RPM, U320)
	**** Technical Computing [https://web.archive.org/web/20050219161856/http://docs.hp.com/en/B3920-90091/ch04s01.html Operating Environment] (TCOE) for workstations
	**** Minimal Technical Operating Environment (MTOE) for workstations		HP-UX Support
	*** 11i v2 (11.23) unofficially~~; except graphics~~		* 10.20 32-bit from version ACE9912
			* 11.00 64-bit from version ACE9911
			* 11i v1 (11.11)
			* 11i v2 (11.23) unofficially: installs with some errors. CDE login hangs.

	Note: with no keyboard, boots with first serial interface as console (9600-8N1)		Note: with no keyboard, boots with first serial interface as console (9600-8N1)

HP-UX

NickPGSmith — Tue, 14 Jul 2026 21:05:51 GMT

Hardware

← Older revision		Revision as of 21:05, 14 July 2026
(4 intermediate revisions by the same user not shown)
Line 110:		Line 110:
	which should produce a device file like "/dev/floppy/c0t1d0".		which should produce a device file like "/dev/floppy/c0t1d0".

	Format a floppy:		Format a floppy (1.44 MB) for use with HFS and mount filesystem:
	mediainit -f 16 /dev/~~floppy~~/c0t1d0		mediainit -f 16 /dev/rfloppy/c0t1d0
			newfs -F hfs /dev/rfloppy/c0t1d0
			mount /dev/rfloppy/c0t1d0 /floppy

	~~where~~ 16 is the format type listed in the floppy command's man page.		Here, 16 is the format type listed in the floppy command's man page. Use 26 for 1.6 MB.

	~~Read/write data to device file with tar, or access~~ DOS formatted files with:		Access MS-DOS formatted files (disks cannot be formatted in HP-UX) with:
	* dosls		dosls /dev/rfloppy/c0t1d0:/somedir
	* doscp		doscp /tmp/somefile.txt /dev/rfloppy/c0t1d0:/

	=== Desktop ===		=== Desktop ===

Hardware

NickPGSmith — Tue, 14 Jul 2026 17:09:31 GMT

Servers/Desktops

← Older revision		Revision as of 17:09, 14 July 2026
(3 intermediate revisions by the same user not shown)
Line 1:		Line 1:
	== ~~Laptop Notes~~ ==		== Laptops ==

	* Dell E6400		* Dell E6400
Line 18:		Line 18:
	** Properties -> Device Settings -> Installable Options -> Duplex Unit: Installed		** Properties -> Device Settings -> Installable Options -> Duplex Unit: Installed

	== ~~Server Notes~~ ==		== Servers/Desktops ==

	* Dell OptiPlex 7040		* Dell OptiPlex 7040
Line 56:		Line 56:
	*** Initially driving: 1280x1024@75Hz, compatible with 1600x1200 @75 Hz		*** Initially driving: 1280x1024@75Hz, compatible with 1600x1200 @75 Hz
	** Firmware 5.0, ISL A.00.43		** Firmware 5.0, ISL A.00.43
	** Liteon CDROM LTN485S -> ~~Samsung CDRW~~/DVD ~~SM-352B~~		** Liteon CDROM LTN485S -> LG GDR8163B CD/DVD Drive
	** Space for 2 SCSI-3 (Ultra 160) Disks		** Space for 2 SCSI-3 (Ultra 160) Disks
	** Disk:		** Disk:
	*** Original: Seagate ST3920LC (9.1 GB, 10 k RPM, U160) / Fujitsu MAN3184MC (18 GB, 10 k RPM, U160)		*** Original: Seagate ST3920LC (9.1 GB, 10 k RPM, U160) / Fujitsu MAN3184MC (18 GB, 10 k RPM, U160)
	*** Upgraded: ~~Fujitsu~~ (73 GB, 10 k RPM, U320)		*** Upgraded: seagate ST373454LC (73 GB, 15 k RPM, U320)
	** Supports HP-UX		** Supports HP-UX
	*** 10.20 32-bit from version ACE9912		*** 10.20 32-bit from version ACE9912

Running

NickPGSmith — Sat, 04 Jul 2026 11:55:29 GMT

5 km

← Older revision		Revision as of 11:55, 4 July 2026
Line 20:		Line 20:
	\|2024-06-29\|\|[https://www.parkrun.org.uk/crystalpalace/parkrunner/6454631/ Crystal Palance Parkrun]\|\|20:43\|\|4:09\|\|		\|2024-06-29\|\|[https://www.parkrun.org.uk/crystalpalace/parkrunner/6454631/ Crystal Palance Parkrun]\|\|20:43\|\|4:09\|\|
	\|-		\|-
	\|~~2024~~-07-27\|\|[https://www.parkrun.org.uk/bromley/parkrunner/6454631/ Bromley Parkrun]\|\|20:27\|\|4:05\|\|		\|2026-07-04\|\|[https://www.parkrun.org.uk/bromley/parkrunner/6454631/ Bromley Parkrun]\|\|19:37\|\|3:55\|\|
	\|-		\|-
	\|2025-03-01\|\|[https://www.parkrun.org.uk/medina/parkrunner/6454631/ Medina IOW Parkrun]\|\|22:04\|\|4:25\|\|		\|2025-03-01\|\|[https://www.parkrun.org.uk/medina/parkrunner/6454631/ Medina IOW Parkrun]\|\|22:04\|\|4:25\|\|

Hardware

NickPGSmith — Fri, 03 Jul 2026 17:36:37 GMT

Server Notes

← Older revision		Revision as of 17:36, 3 July 2026
(One intermediate revision by the same user not shown)
Line 49:		Line 49:
	cd map1		cd map1
	set license=35DPHSVSXJHGBJNC7N5R2SS4W		set license=35DPHSVSXJHGBJNC7N5R2SS4W

			* HP Vizualize [https://www.openpa.net/systems/hp-visualize_b1000_c3000_c3600.html C3000] (9000/785/C3000)
			** 400 MHz PA-RISC PA-8500
			** 512 MB (4 of 8 slots, max 8 GB)
			** HP Visualize FX6 (A4554B) Graphics Card ([https://en.wikipedia.org/wiki/VESA_Enhanced_Video_Connector EVC] aka P&D-A Output) (with A4560A texture accelerator)
			*** Initially driving: 1280x1024@75Hz, compatible with 1600x1200 @75 Hz
			** Firmware 5.0, ISL A.00.43
			** Liteon CDROM LTN485S -> Samsung CDRW/DVD SM-352B
			** Space for 2 SCSI-3 (Ultra 160) Disks
			** Disk:
			*** Original: Seagate ST3920LC (9.1 GB, 10 k RPM, U160) / Fujitsu MAN3184MC (18 GB, 10 k RPM, U160)
			*** Upgraded: Fujitsu (73 GB, 10 k RPM, U320)
			** Supports HP-UX
			*** 10.20 32-bit from version ACE9912
			*** 11.00 64-bit from version ACE9911
			*** 11i v1 (11.11)
			**** Last Patches: "December 2009 Gold QPK bundle" (GOLDQPK11i-11.11.0912)
			**** Technical Computing [https://web.archive.org/web/20050219161856/http://docs.hp.com/en/B3920-90091/ch04s01.html Operating Environment] (TCOE) for workstations
			**** Minimal Technical Operating Environment (MTOE) for workstations
			*** 11i v2 (11.23) unofficially; except graphics

			Note: with no keyboard, boots with first serial interface as console (9600-8N1)

HP-UX

NickPGSmith — Fri, 03 Jul 2026 17:26:08 GMT

Hardware

@@ Line 1: / Line 1: @@
 == Software ==
@@ Line 37: / Line 14: @@
 === Processor Dependent Code ===
-Interrupt PDC boot process by keyboard in 10s, to enter boot menu:
+Interrupt PDC boot process by keyboard in 10s, to enter Boot Console Handler (BCH):
 To show current options and help, and get to main menu:

OpenWRT

NickPGSmith — Wed, 01 Jul 2026 12:24:18 GMT

TP-Link Archer C7 v4 / v5

← Older revision		Revision as of 12:24, 1 July 2026
Line 9:		Line 9:
	* [https://openwrt.org/toh/tp-link/archer_c7 Device page]		* [https://openwrt.org/toh/tp-link/archer_c7 Device page]
	* 775 MHz CPU, 16 MiB flash, 128 MiB RAM		* 775 MHz CPU, 16 MiB flash, 128 MiB RAM
	* Currently Installed: 25.12.3		* Currently Installed: 25.12.4
	* Max Power (2.4/5 GHz): 24/30 dBm		* Max Power (2.4/5 GHz): 24/30 dBm
	* When routing/firewall, max throughput is ~ 135 Mbps until "Software flow offloading" is enabled.		* When routing/firewall, max throughput is ~ 135 Mbps until "Software flow offloading" is enabled.

Hardware

NickPGSmith — Wed, 01 Jul 2026 10:05:36 GMT

Printers

← Older revision		Revision as of 10:05, 1 July 2026
Line 16:		Line 16:
	** Printing Preferences -> Layout -> Margin Shift/Margin -> Print Position -> Position: Center		** Printing Preferences -> Layout -> Margin Shift/Margin -> Print Position -> Position: Center
	* HP LaserJet P2055dn		* HP LaserJet P2055dn
	** Duplex		** Properties -> Device Settings -> Installable Options -> Duplex Unit: Installed

	== Server Notes ==		== Server Notes ==

DBS

NickPGSmith — Tue, 30 Jun 2026 15:43:56 GMT

Configuration

← Older revision		Revision as of 15:43, 30 June 2026
Line 2:		Line 2:

	80 cm Triax dish, Technomate switch		80 cm Triax dish, Technomate switch
	* A: 19.2°E Astra 1 (~~Invecto~~ Green, focus)		* A: 19.2°E Astra 1 (Inverto Green, focus)
	** [https://www.lyngsat.com/maps/footprints/Astra-1KR-Europe.html Europe]		** [https://www.lyngsat.com/maps/footprints/Astra-1KR-Europe.html Europe]
	** [https://www.lyngsat.com/maps/footprints/Astra-1L-Europe-Ku.html Europe Ku]		** [https://www.lyngsat.com/maps/footprints/Astra-1L-Europe-Ku.html Europe Ku]
Line 10:		Line 10:
	** UK Spot		** UK Spot
	** Europe Ku		** Europe Ku
	* C: 23.5°E Astra 3 (~~Invecto~~ Green)		* C: 23.5°E Astra 3 (Inverto Green)
	** [https://www.lyngsat.com/maps/footprints/Astra-3B-Europe-Ku.html Europe Ku]		** [https://www.lyngsat.com/maps/footprints/Astra-3B-Europe-Ku.html Europe Ku]
	** [https://www.lyngsat.com/maps/footprints/Astra-3B-Europe-Wide.html Europe Wide]		** [https://www.lyngsat.com/maps/footprints/Astra-3B-Europe-Wide.html Europe Wide]
	* D: 13°E Hotbird 13 (Technomate TM-1)		* D: 13°E Hotbird 13 (Technomate TM-1)
	** Wide		** Wide
	60 cm ~~Orbial~~ dish		60 cm Orbital dish
	* 4.8°E/5.0°E Astra 4/SES 5 (~~Invecto~~ Black)		* 4.8°E/5.0°E Astra 4/SES 5 (Inverto Black)
	** [https://www.lyngsat.com/maps/footprints/Astra-4A-Europe-BSS.html Europe BSS]		** [https://www.lyngsat.com/maps/footprints/Astra-4A-Europe-BSS.html Europe BSS]
	** One transponder at 10% from [https://www.lyngsat.com/maps/footprints/Astra-4A-Nordic-BSS.html Nordic BSS]		** One transponder at 10% from [https://www.lyngsat.com/maps/footprints/Astra-4A-Nordic-BSS.html Nordic BSS]

Solaris

NickPGSmith — Fri, 26 Jun 2026 10:53:08 GMT

ZFS and disks (on x86)

@@ Line 7: / Line 7: @@
 see in /etc/os-release
 CBE does not install a desktop. To do this after a text install, change the repository location:
@@ Line 210: / Line 233: @@
 == NTP ==
-Client:
+Copy client file and edit server list:
   cd /etc/inet; cp ntp.client > ntp.conf
   svcadm enable network/ntp:default
@@ Line 264: / Line 285: @@
 Disks can be listed and formatted with:
   format
 Show all pools, or specific info about the root pool:
@@ Line 272: / Line 305: @@
   zfs list
-The default root pool (rpool) is a single disk immediately after install (eg c3t0d0). Add a second disk (c3t1d0) to make a mirrorm and ensure it's bootable:
+=== Create a rpool mirror ===
-  prtvtoc /dev/rdsk/c3t0d0s2 | fmthard -s - /dev/rdsk/c3t1d0s2
+Ensure that either disk can boot if the other fails:
- zpool attach rpool c3t0d0 c3t1d0
+  bootadm install-bootloader -M -P rpool /dev/rdsk/c3t0d0s0
-  bootadm install-bootloader -v
+  bootadm install-bootloader -M -P rpool /dev/rdsk/c3t1d0s0
-Then, monitor "zpool status rpool" output until "resilvering" is complete. If the first disk is removed/failed, it should still boot with the second disk, although some nonessential filesystems (/export/home) will not. These can be mounted with:
+Slice s0 is used to mean the whole disk when formatted. If the first disk is removed/failed, it should still boot with the second disk, although some nonessential filesystems (/export/home) will not. These can be mounted with:
   zfs mount -a

DBS

NickPGSmith — Thu, 25 Jun 2026 13:28:45 GMT

Satellites

← Older revision		Revision as of 13:28, 25 June 2026
(One intermediate revision by the same user not shown)
Line 186:		Line 186:
	* 14°W Express AM8 (Elevation X°, mag direction X°, Pol +X°)		* 14°W Express AM8 (Elevation X°, mag direction X°, Pol +X°)

	* 15°W Telstar 12 Vantage (Elevation X°, mag direction X°, Pol ~~+X°~~)		* 15°W Telstar 12 Vantage (Elevation 29°, mag direction 228°, Pol -14°)
			** [https://www.satbeams.com/footprints?position=228 Sat Beams]
	** ?		** ?
	** ?		*** Reuters Live
	*** EXRN
	*** BUYU TV
	* 22°W: SES-4 (Elevation 27.6°, mag direction 207.0°, Pol +16.6°)		* 22°W: SES-4 (Elevation 27.6°, mag direction 207.0°, Pol +16.6°)
	** [https://www.satbeams.com/footprints?position=330 Sat Beams]		** [https://www.satbeams.com/footprints?position=330 Sat Beams]

Solaris

NickPGSmith — Thu, 25 Jun 2026 10:10:07 GMT

ZFS and disks (on x86)

← Older revision		Revision as of 10:10, 25 June 2026
(One intermediate revision by the same user not shown)
Line 265:		Line 265:
	format		format

	~~Will show at least~~ the root pool ~~(rpool)~~:		Show all pools, or specific info about the root pool:
	zpool list		zpool list
	zpool status rpool		zpool status rpool
Line 278:		Line 278:
	bootadm install-bootloader -v		bootadm install-bootloader -v

	Then, monitor "zpool status rpool" output until "resilvering" is complete.		Then, monitor "zpool status rpool" output until "resilvering" is complete. If the first disk is removed/failed, it should still boot with the second disk, although some nonessential filesystems (/export/home) will not. These can be mounted with:
			zfs mount -a

	=== Pools and Datasets ===		=== Pools and Datasets ===

NTP

NickPGSmith — Thu, 25 Jun 2026 08:20:45 GMT

Created page with "== Servers == Default pools: * OpenWRT ** 0.openwrt.pool.ntp.org ** 1.openwrt.pool.ntp.org ** 2.openwrt.pool.ntp.org ** 3.openwrt.pool.ntp.org * NTP ** 0.uk.pool.ntp.org ** 1.uk.pool.ntp.org ** 2.uk.pool.ntp.org ** 3.uk.pool.ntp.org Also: * time.cloudflare.com * time.google.com"

New page

== Servers ==

Default pools:
* OpenWRT
** 0.openwrt.pool.ntp.org
** 1.openwrt.pool.ntp.org
** 2.openwrt.pool.ntp.org
** 3.openwrt.pool.ntp.org
* NTP
** 0.uk.pool.ntp.org
** 1.uk.pool.ntp.org
** 2.uk.pool.ntp.org
** 3.uk.pool.ntp.org

Also:
* time.cloudflare.com
* time.google.com

Main Page

NickPGSmith — Thu, 25 Jun 2026 08:14:42 GMT

Local Content

← Older revision		Revision as of 08:14, 25 June 2026
Line 18:		Line 18:
	* [[Linux]]		* [[Linux]]
	* [[MacOS]]		* [[MacOS]]
			* [[NTP]]
	* [[OpenWRT]]		* [[OpenWRT]]
	* [[OpenVMS]]		* [[OpenVMS]]

Solaris

NickPGSmith — Thu, 25 Jun 2026 08:09:42 GMT

ZFS

← Older revision		Revision as of 08:09, 25 June 2026
(One intermediate revision by the same user not shown)
Line 215:		Line 215:
	(edit file)		(edit file)

	svcadm enable ntp		svcadm enable network/ntp:default
	~~svcadm restart~~ ntp		svcs network/ntp
			ntpq -p

	== Reset root password ==		== Reset root password ==
Line 256:		Line 257:
	* reboot		* reboot

	== ZFS ==		== ZFS and disks (on x86) ==

			Show Disks:
			iostat -En

	Disks can be listed and formatted with:		Disks can be listed and formatted with:
Line 268:		Line 272:
	zfs list		zfs list

	The default root pool (rpool) is a single disk immediately after install (eg ~~c1t0d0~~). Add a second disk (~~c1t1d0~~) to make a ~~mirror~~:		The default root pool (rpool) is a single disk immediately after install (eg c3t0d0). Add a second disk (c3t1d0) to make a mirrorm and ensure it's bootable:
	zpool attach rpool ~~c1t0d0 c1t1d0~~
			prtvtoc /dev/rdsk/c3t0d0s2 \| fmthard -s - /dev/rdsk/c3t1d0s2
			zpool attach rpool c3t0d0 c3t1d0
			bootadm install-bootloader -v

	Then, monitor "zpool status rpool" output until "resilvering" is complete.		Then, monitor "zpool status rpool" output until "resilvering" is complete.