Smithnet Wiki - Recent changes [en-gb]

HP-UX

NickPGSmith — Fri, 17 Jul 2026 17:30:03 GMT

@@ Line 9: / Line 9: @@
 Other software archive:
 * [https://archive.org/details/ftp-hpux-connect-org-uk HP Connect]
 == Boot ==

Hardware

NickPGSmith — Fri, 17 Jul 2026 07:23:37 GMT

HP Vizualize C3000 (9000/785/C3000)

← Older revision		Revision as of 07:23, 17 July 2026
(11 intermediate revisions by the same user not shown)
Line 1:		Line 1:
	== Laptops ==		== Laptops ==

	* Dell E6400		=== Dell E6400 ===
	** CPU: Core2Duo (2 logical processors)
	** RAM: 8 GiB (2 x 4 GiB PC2-6400)		* CPU: Core2Duo (2 logical processors)
	** Max RAM: 8 GiB		* RAM: 8 GiB (2 x 4 GiB PC2-6400)
	* Dell E7450		* Max RAM: 8 GiB
	** CPU: Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz (4 logical processors)		Dell E7450
	** RAM: 16 GiB (2 x 8 GB DDR3 PC3L-12800/DDR3L-1600)		* CPU: Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz (4 logical processors)
	** Max RAM: 16 GiB (offical, 32 GiB unofficial with DDR3Low Voltage)		* RAM: 16 GiB (2 x 8 GB DDR3 PC3L-12800/DDR3L-1600)
			* Max RAM: 16 GiB (offical, 32 GiB unofficial with DDR3Low Voltage)

	== Printers ==		== Printers ==

	* Dell 1350cnw		=== Dell 1350cnw ===
	** Colour
	** Printing Preferences -> Layout -> Margin Shift/Margin -> Print Position -> Position: Center		* Colour
	* HP LaserJet P2055dn		* Printing Preferences -> Layout -> Margin Shift/Margin -> Print Position -> Position: Center
	** Properties -> Device Settings -> Installable Options -> Duplex Unit: Installed
			=== HP LaserJet P2055dn ===

			* Properties -> Device Settings -> Installable Options -> Duplex Unit: Installed

	== Servers/Desktops ==		== Servers/Desktops ==

	* Dell OptiPlex 7040		=== Dell OptiPlex 7040 ===

	** CPU: Intel Core i7-6700 CPU @ 3.40 GHz (8 logical processors)		** CPU: Intel Core i7-6700 CPU @ 3.40 GHz (8 logical processors)
	** RAM: 32 GiB (4 x 8 GiB)		** RAM: 32 GiB (4 x 8 GiB)
	** Max RAM: 64 GiB (4 x 16 GiB)		** Max RAM: 64 GiB (4 x 16 GiB)
	* Dell OptiPlex 9010		** 120 MHz ECC SDRAM, propriety
	** CPU: Intel Core i7-3770 CPU @ 3.40 GHz (8 logical processors)
	** RAM: 32 GiB (4 x 8 GiB)		=== Dell OptiPlex 9010 ===
	** Max RAM: 32 GiB (PC4-2400) (4 x 8 GiB)
	* Dell PowerEdge T320		* CPU: Intel Core i7-3770 CPU @ 3.40 GHz (8 logical processors)
	** CPU: Intel Pentium 1400 / Intel Xeon E5-1410 / Intel Xeon E5-2400 / Intel Xeon E5-2400 v2 (4 - 8 cores)		* RAM: 32 GiB (4 x 8 GiB)
	** RAM:		* Max RAM: 32 GiB (PC4-2400) (4 x 8 GiB)
	** Max RAM: 196 GiB (PC3-10600/DDR3-1333 Registered DIMM, ECC) (6 x 32 GiB)
	* HP DL380G5		=== Dell PowerEdge T320 ===
	** CPU: Intel Xeon E5450 @ 3 GHz
	** RAM: 16 GB (8 x 2 GiB)		* CPU: Intel Pentium 1400 / Intel Xeon E5-1410 / Intel Xeon E5-2400 / Intel Xeon E5-2400 v2 (4 - 8 cores)
	** Max RAM: 64 GB (8 x 8 GiB)		* RAM:
			* Max RAM: 196 GiB (PC3-10600/DDR3-1333 Registered DIMM, ECC) (6 x 32 GiB)

			=== HP DL380G5 ===

			* CPU: Intel Xeon E5450 @ 3 GHz
			* RAM: 16 GB (8 x 2 GiB)
			* Max RAM: 64 GB (8 x 8 GiB)
	* HP iLO 2.33		* HP iLO 2.33
	** ssh -oKexAlgorithms=+diffie-hellman-group1-sha1 -oHostKeyAlgorithms=+ssh-rsa host-ilo		** ssh -oKexAlgorithms=+diffie-hellman-group1-sha1 -oHostKeyAlgorithms=+ssh-rsa host-ilo
Line 50:		Line 61:
	set license=35DPHSVSXJHGBJNC7N5R2SS4W		set license=35DPHSVSXJHGBJNC7N5R2SS4W

	* HP Vizualize [https://www.openpa.net/systems/hp-visualize_b1000_c3000_c3600.html C3000] (9000/785/C3000)		=== HP Vizualize [https://www.openpa.net/systems/hp-visualize_b1000_c3000_c3600.html C3000] (9000/785/C3000) ===
	** 400 MHz PA-RISC PA-8500
	** 512 MB (4 of 8 slots, max 8 GB)		* 400 MHz PA-RISC PA-8500
	** HP Visualize FX6 (A4554B) Graphics Card ([https://en.wikipedia.org/wiki/VESA_Enhanced_Video_Connector EVC] aka P&D-A Output) (with A4560A texture accelerator)		* 512 MB (4 of 8 slots, max 8 GB)
	*** Initially driving: 1280x1024@75Hz, compatible with 1600x1200 @75 Hz		** Proprietary ECC RAM: A4995A for 512 MB, A6016A for 1 GB
	** Firmware 5.0, ISL A.00.43		* HP Visualize FX6 (A4554B) Graphics Card ([https://en.wikipedia.org/wiki/VESA_Enhanced_Video_Connector EVC] aka P&D-A Output) (with A4560A texture accelerator)
	** Liteon CDROM LTN485S -> LG GDR8163B CD/DVD Drive		** Initially driving: 1280x1024@75Hz, compatible with 1600x1200 @75 Hz
	** Space for 2 SCSI-3 (Ultra 160) Disks		* Firmware 5.0, ISL A.00.43
	** Disk:		* Liteon CDROM LTN485S -> LG GDR8163B CD/DVD Drive
	*** Original: Seagate ST3920LC (9.1 GB, 10 k RPM, U160) / Fujitsu MAN3184MC (18 GB, 10 k RPM, U160)		* External SCSI:
	*** Upgraded: ~~seagate~~ ST373454LC (73 GB, 15 k RPM, U320)		** 68 pin Ultra2 Wide/LVD
	** Supports HP-UX		** 50 pin "Narrow" SCSI-2
	*** 10.20 32-bit from version ACE9912		* Internal SCSI:
	*** 11.00 64-bit from version ACE9911		** Space for two SCA, Ultra2 (SCSI-3) / Ultra 160 Disks
	*** 11i v1 (11.11)		** Original: Seagate ST3920LC (9.1 GB, 10 k RPM, U160) / Fujitsu MAN3184MC (18 GB, 10 k RPM, U160)
	**** Last Patches: "December 2009 Gold QPK bundle" (GOLDQPK11i-11.11.0912)		** Upgraded: Seagate ST373454LC (73 GB, 15 k RPM, U320)
	**** Technical Computing [https://web.archive.org/web/20050219161856/http://docs.hp.com/en/B3920-90091/ch04s01.html Operating Environment] (TCOE) for workstations
	**** Minimal Technical Operating Environment (MTOE) for workstations		HP-UX Support
	*** 11i v2 (11.23) unofficially~~; except graphics~~		* 10.20 32-bit from version ACE9912
			* 11.00 64-bit from version ACE9911
			* 11i v1 (11.11)
			* 11i v2 (11.23) unofficially: installs with some errors. CDE login hangs.

	Note: with no keyboard, boots with first serial interface as console (9600-8N1)		Note: with no keyboard, boots with first serial interface as console (9600-8N1)

HP-UX

NickPGSmith — Tue, 14 Jul 2026 21:05:51 GMT

Hardware

← Older revision		Revision as of 21:05, 14 July 2026
(4 intermediate revisions by the same user not shown)
Line 110:		Line 110:
	which should produce a device file like "/dev/floppy/c0t1d0".		which should produce a device file like "/dev/floppy/c0t1d0".

	Format a floppy:		Format a floppy (1.44 MB) for use with HFS and mount filesystem:
	mediainit -f 16 /dev/~~floppy~~/c0t1d0		mediainit -f 16 /dev/rfloppy/c0t1d0
			newfs -F hfs /dev/rfloppy/c0t1d0
			mount /dev/rfloppy/c0t1d0 /floppy

	~~where~~ 16 is the format type listed in the floppy command's man page.		Here, 16 is the format type listed in the floppy command's man page. Use 26 for 1.6 MB.

	~~Read/write data to device file with tar, or access~~ DOS formatted files with:		Access MS-DOS formatted files (disks cannot be formatted in HP-UX) with:
	* dosls		dosls /dev/rfloppy/c0t1d0:/somedir
	* doscp		doscp /tmp/somefile.txt /dev/rfloppy/c0t1d0:/

	=== Desktop ===		=== Desktop ===

Hardware

NickPGSmith — Tue, 14 Jul 2026 17:09:31 GMT

Servers/Desktops

← Older revision		Revision as of 17:09, 14 July 2026
(One intermediate revision by the same user not shown)
Line 56:		Line 56:
	*** Initially driving: 1280x1024@75Hz, compatible with 1600x1200 @75 Hz		*** Initially driving: 1280x1024@75Hz, compatible with 1600x1200 @75 Hz
	** Firmware 5.0, ISL A.00.43		** Firmware 5.0, ISL A.00.43
	** Liteon CDROM LTN485S -> ~~Samsung CDRW~~/DVD ~~SM-352B~~		** Liteon CDROM LTN485S -> LG GDR8163B CD/DVD Drive
	** Space for 2 SCSI-3 (Ultra 160) Disks		** Space for 2 SCSI-3 (Ultra 160) Disks
	** Disk:		** Disk:
	*** Original: Seagate ST3920LC (9.1 GB, 10 k RPM, U160) / Fujitsu MAN3184MC (18 GB, 10 k RPM, U160)		*** Original: Seagate ST3920LC (9.1 GB, 10 k RPM, U160) / Fujitsu MAN3184MC (18 GB, 10 k RPM, U160)
	*** Upgraded: ~~Fujitsu~~ (73 GB, 10 k RPM, U320)		*** Upgraded: seagate ST373454LC (73 GB, 15 k RPM, U320)
	** Supports HP-UX		** Supports HP-UX
	*** 10.20 32-bit from version ACE9912		*** 10.20 32-bit from version ACE9912