Tape Recording Calibration and Metering: Difference between revisions
Jump to navigation
Jump to search
NickPGSmith (talk | contribs) No edit summary |
NickPGSmith (talk | contribs) |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 6: | Line 6: | ||
* [[Media:BASF Meters and Measurement.pdf|BASF Reference]] | * [[Media:BASF Meters and Measurement.pdf|BASF Reference]] | ||
* [https://en.wikipedia.org/wiki/Compact_Cassette_tape_types_and_formulations Wikipedia - Tape Formulations] | * [https://en.wikipedia.org/wiki/Compact_Cassette_tape_types_and_formulations Wikipedia - Tape Formulations] | ||
== Recorded Flux == | == Recorded Flux == | ||
| Line 25: | Line 25: | ||
** 0 dB is 250 nWb/m | ** 0 dB is 250 nWb/m | ||
** Dolby level shown at -1.2 dB | ** Dolby level shown at -1.2 dB | ||
** Used by Sony, TEAC | ** Used by Marantz, Sony, TEAC | ||
* Nakamichi | * Nakamichi | ||
** 0 dB is 200 nW/m | ** 0 dB is 200 nW/m | ||
| Line 34: | Line 34: | ||
** Most common, used by Aiwa, Akai, Pioneer, Technics, etc | ** Most common, used by Aiwa, Akai, Pioneer, Technics, etc | ||
True VU Meters have a tightly controlled professional definition of response, but are more approximate in consumer grade equipment. They show an average signal level over time, and smooth out sharp peaks. | True [https://en.wikipedia.org/wiki/VU_meter VU Meters] have a tightly controlled professional definition of response, but are more approximate in consumer grade equipment. They show an average signal level over time, and smooth out sharp peaks. | ||
* 3 % distortion level is usually around +6 to +8 VU | * 3% distortion level is usually around +6 to +8 VU | ||
Peak Meters have fast response, showing peak levels. Better for use on cassette decks with their lower headroom compared to faster tape speeds of Open Reel decks. | Peak Meters have fast response, showing peak levels. Better for use on cassette decks with their lower headroom compared to faster tape speeds of Open Reel decks. | ||
* Generally 0 dB on a VU meter is a lower flux level than 0 dB on a peak meter, by about 3 dB. | * Generally 0 dB on a VU meter is a lower flux level than 0 dB on a peak meter, by about 3 dB. | ||
Latest revision as of 11:43, 24 May 2024
Accurate calibration of a tape based recording is necessary to match record and replay levels, and is critical for Dolby tracking.
Reference:
Recorded Flux
- 3% distortion is generally considered maximum acceptable.
- MOL (Maximum Output Level):
- Level that produces 3rd harmonic distortion of 3%
- Frequency dependent. At high frequencies can't be used as harmonics won't be reproduced.
- SOL (Saturated Output Level):
- The level which produces the maximum output. More record level reduces playback output.
- Measurement of flux can be open circuit or closed circuit
- 200 nWb/m closed circuit = 220 nWb/m open circuit (Dolby Level)
Metering
Three standards:
- DIN
- 0 dB is 250 nWb/m
- Dolby level shown at -1.2 dB
- Used by Marantz, Sony, TEAC
- Nakamichi
- 0 dB is 200 nW/m
- Dolby level shown at 0 dB
- Old Philips
- 0 dB is 160 nWb/m
- Dolby level shown at 2.8 dB
- Most common, used by Aiwa, Akai, Pioneer, Technics, etc
True VU Meters have a tightly controlled professional definition of response, but are more approximate in consumer grade equipment. They show an average signal level over time, and smooth out sharp peaks.
- 3% distortion level is usually around +6 to +8 VU
Peak Meters have fast response, showing peak levels. Better for use on cassette decks with their lower headroom compared to faster tape speeds of Open Reel decks.
- Generally 0 dB on a VU meter is a lower flux level than 0 dB on a peak meter, by about 3 dB.